High Strength Green Wicking Threadlocker – MIL-S-46163A – MRO Solutions
- ✔ In Stock — Ships Same Day or Next Business Day
- ✔ Trusted by contractors and industrial buyers
- ✔ Bulk pricing available — Request a Quote
Contact us for contractor pricing or large quantity discounts →
Couldn't load pickup availability
- ✓ Wicking (penetrating) grade – treats fasteners that are already assembled
- ✓ High-strength lock and seal for hardware in service
- ✓ Meets MIL-S-46163A, Type III, Grade R
- ✓ Low-viscosity formula wicks into engaged threads by capillary action
High Demand Item – Frequently Reordered by Contractors
Solution 12 is a high-strength green wicking (penetrating) anaerobic threadlocker. Unlike standard grades applied before assembly, it is designed to be applied to the threads of fasteners that are already assembled – the low-viscosity formula penetrates into the engaged threads by capillary action, then cures in the absence of air to lock and seal them.
It can also be used to seal weld and casting porosity. Supplied as a green liquid; because it’s a high-strength grade, disassembly is difficult. Available in 10 ml, 50 ml, and 250 ml bottles.
Applications
- Securing fasteners that are already assembled, without disassembly
- Sealing weld and casting porosity
- Locking set screws and adjustment screws after final setting
- Reinforcing fasteners already in service
- Treating hardware in hard-to-reach locations
Key Features
- Wicking / penetrating – treats already-assembled fasteners
- High strength hold
- Low-viscosity formula for capillary penetration
- Also seals weld and casting porosity
- Green color for quick identification of the wicking grade
- Meets MIL-S-46163A, Type III, Grade R
- Sets in 1–10 min; reaches full strength in 24 hours
Specifications
| Type | Anaerobic threadlocker, single-component |
| Strength | High (wicking / penetrating) |
| Color | Green |
| Service Temperature | –65°F to +300°F |
| Fixture Time | 1–10 min |
| Full Cure | 24 hours |
| Viscosity | 10–25 cP |
| Max Gap Fill | 0.002 in |
| Breakaway Torque | 50–105 in-lb |
| Prevailing Torque | 170–350 in-lb |
| Shelf Life | 1 year (minimum) |
| Military Spec | MIL-S-46163A, Type III, Grade R |
| Available Sizes | 10 ml, 50 ml, 250 ml |
Best Used For
- Fasteners already torqued in place
- Sealing weld and casting porosity
- Set and adjustment screws after final setting
- Locking instrumentation and small fasteners in service
FAQ
Is it applied before or after assembly?
After. The low-viscosity formula wicks into the threads of fasteners that are already assembled.
Can it seal porosity?
Yes – it can also be used to seal weld and casting porosity.
Can treated fasteners be removed?
It’s a high-strength grade – disassembly is difficult.
Does it meet a military specification?
Yes – MIL-S-46163A, Type III, Grade R.
Why Contractors Choose This
- Treats fasteners already in place – no disassembly required
- Doubles as a weld and casting porosity sealer
- Backed by a recognized military spec (MIL-S-46163A)
- Single-component and fast to apply
- Case pricing that drops as the order grows
- ✓ Meets MIL-S-46163A, Type III, Grade R
- ✓ Low-viscosity wicking formula for assembled hardware
- ✓ Bulk and case pricing built for shops and contractors
- ✓ Sold and supported by a distribution team with decades in the trade
Buy More. Save More.
Save 10% when you order a full case. Case and volume pricing available on every size – contact us for shop and contractor pricing on multi-case orders.