Solution 7 Cyanoacrylate Gel Adhesive – No-Run, Gap-Filling – MRO Solutions
- ✔ In Stock — Ships Same Day or Next Business Day
- ✔ Trusted by contractors and industrial buyers
- ✔ Bulk pricing available — Request a Quote
Contact us for contractor pricing or large quantity discounts →
Couldn't load pickup availability
- ✓ No-run ethyl cyanoacrylate gel – stays where you place it
- ✓ Ideal for vertical, overhead, and porous surfaces
- ✓ Fills gaps to 0.010″ on loose-fitting parts
- ✓ Bonds in seconds with no drip or run
High Demand Item – Frequently Reordered by Contractors
Solution 7 is a no-run ethyl cyanoacrylate gel. Its non-flowing body stays exactly where you apply it – on vertical and overhead surfaces and porous materials – then cures in seconds with surface moisture, with no drip or run.
The gel form fills gaps to 0.010″, making it well suited to loose-fitting and uneven parts. Supplied in a 7/10 oz tube.
Applications
- Vertical and overhead bonding
- Porous materials such as wood and leather
- Loose-fitting or uneven joints
- Bonding where drips and runs are a problem
- Controlled spot application
Key Features
- Bonds in seconds; full strength in about 24 hours
- No-run gel – stays where you place it
- Fills gaps to 0.010″
- Ideal for vertical, overhead, and porous surfaces
- Single-component – no mixing
Specifications
| Type | Ethyl cyanoacrylate gel, single-component |
| Viscosity | Gel (non-flowing) |
| Max Gap Fill | 0.010 in |
| Tensile Strength (steel) | 3,200 psi (ASTM D-2095) |
| Flash Point | 185°F |
| Specific Gravity | 1.05 |
| Soluble In | Acetone |
| Available Sizes | 7/10 oz tube |
Best Used For
- Vertical and overhead surfaces
- Porous materials (wood, leather)
- Loose-fitting and uneven joints
- Spot bonding without drips
FAQ
Will it run or drip?
No – the gel body stays where you place it, even on vertical and overhead surfaces.
How big a gap can it fill?
Up to 0.010″.
What does it bond?
A wide range of materials, including porous ones such as wood and leather.
How fast does it set?
It bonds in seconds and reaches full strength in about 24 hours.
Why Contractors Choose This
- No drips or runs on vertical and overhead work
- Fills gaps thin CAs cannot
- Bonds porous materials cleanly
- Controlled tube application
- Case pricing that drops as the order grows
- ✓ No-run gel for vertical and porous surfaces
- ✓ Single-component – bonds in seconds, no mixing
- ✓ Bulk and case pricing built for shops and contractors
- ✓ Sold and supported by a distribution team with decades in the trade
Buy More. Save More.
Save 10% when you order a full case. Case and volume pricing available on every size – contact us for shop and contractor pricing on multi-case orders.