Solution 4 Wicking Cyanoacrylate Adhesive ā MRO Solutions
- ā In Stock ā Ships Same Day or Next Business Day
- ā Trusted by contractors and industrial buyers
- ā Bulk pricing available ā Request a Quote
Couldn't load pickup availability
- āĀ Ultra-thin wicking ethyl cyanoacrylate (2ā10 cP)
- āĀ Penetrates tight, pre-assembled joints by capillary action
- āĀ Bonds close-fitting parts to 0.002ā³ in seconds
- āĀ Meets MIL-A-46050C, Type II, Class 1
High Demand Item ā Frequently Reordered by Contractors
Solution 4 is an ultra-thin, wicking ethyl cyanoacrylate instant adhesive. At just 2ā10 cP it flows into tight, close-fitting joints ā even on parts that are already assembled ā wicking into the bond line by capillary action and curing in seconds.
Its 0.002ā³ gap fill suits press fits and precision parts where any thicker grade would not penetrate. Supplied in a 1 oz bottle and a 1 lb bulk bottle.
Applications
- Wicking into pre-assembled, tight-fitting parts
- Reinforcing press fits and precision components
- Bonding close-tolerance joints
- Tacking fine wires and small components
- Penetrating hairline joints a thicker CA cannot reach
Key Features
- Bonds in seconds; full strength in about 24 hours
- Ultra-low viscosity (2ā10 cP) ā wicks by capillary action
- Treats parts that are already assembled
- Gap fill to 0.002ā³
- Single-component ā no mixing
- Meets MIL-A-46050C, Type II, Class 1
Specifications
| Type | Ethyl cyanoacrylate (wicking), single-component |
| Viscosity | 2ā10 cP |
| Max Gap Fill | 0.002 in |
| Tensile Strength (steel) | 4,000 psi (ASTM D-2095) |
| Impact Strength | 3ā5 ft-lb/in |
| Hardness | Rockwell M75 |
| Flash Point | 185Ā°F |
| Specific Gravity | 1.05 |
| Soluble In | Acetone, DMF |
| Military Spec | MIL-A-46050C, Type II, Class 1 |
| Available Sizes | 1 oz, 1 lb |
Best Used For
- Tight, close-fitting joints
- Already-assembled parts
- Press-fit reinforcement
- Fine wires and precision components
FAQ
Can it bond parts already assembled?
Yes ā the ultra-thin body wicks into the joint by capillary action.
What viscosity is it?
Very low, 2ā10 cP ā the thinnest grade.
How tight a fit does it need?
It bonds close fits to 0.002ā³.
Does it meet a military spec?
Yes ā MIL-A-46050C, Type II, Class 1.
Why Contractors Choose This
- Reaches joints no thicker CA can penetrate
- Treats parts already in place
- Backed by a recognized military spec (MIL-A-46050C)
- Stocked in 1 oz and 1 lb bulk
- Case pricing that drops as the order grows
- āĀ Meets MIL-A-46050C, Type II, Class 1
- āĀ Single-component ā bonds in seconds, no mixing
- āĀ Bulk and case pricing built for shops and contractors
- āĀ Sold and supported by a distribution team with decades in the trade
Buy More. Save More.
Save 10% when you order a full case. Case and volume pricing available on every size ā contact us for shop and contractor pricing on multi-case orders.