Em-Lok Adjustable Swivel Ring Hanger (3/8" Rod) Pre-Galv with Gray Felt IPS
- ✔ In Stock — Ships Same Day or Next Business Day
- ✔ Trusted by contractors and industrial buyers
- ✔ Bulk pricing available — Request a Quote
Contact us for contractor pricing or large quantity discounts →
Couldn't load pickup availability
Adjustable swivel-ring hanger with felt lining. The EM-LOK swivel ring bolts around the pipe and threads onto a hanger rod through a swivel nut; a gray felt lining cushions the pipe and helps dampen noise and isolate condensation. Pre-galvanized, sized for 3/8" rod, IPS.
- Ring bolts around the pipe with a felt lining
- Swivel nut threads onto the hanger rod and aligns to the run
- Felt cushions the pipe and dampens noise/condensation transfer
- Pre-galvanized (zinc) coating for general corrosion resistance
- Manufactured to MSS SP-58 pipe support standards
✔ Used by contractors and professionals
✔ Designed for reliable jobsite performance
Overview
The swivel-ring hanger is one of the most widely used hangers for horizontal pipe. This version adds a gray felt lining inside the ring to cushion the pipe — useful where noise transmission or condensation at the support point is a concern. EM-LOK is Empire's adjustable swivel-ring design, with a swivel nut that threads onto the hanger rod and lets the ring align to the run. Pre-galvanized for general corrosion resistance.
Common Uses
- Horizontal pipe where noise or condensation control matters
- Domestic water and HVAC piping in occupied spaces
- Commercial and institutional mechanical systems
- Runs needing a cushioned support point
Key Features
- Gray felt lining cushions the pipe
- Adjustable swivel-ring design
- Sized for 3/8" threaded rod
- Pre-galvanized for general corrosion resistance
- MSS SP-58 / SP-69 Type 10
Specifications
| Type | Adjustable Swivel Ring Hanger — Felt-Lined (Empire Fig. 310) |
| Finish | Pre-Galvanized, Felt-Lined |
| Rod | 3/8" |
| Pipe Sizing | IPS |
| Standard | MSS SP-58 / SP-69 Type 10 |
Load Ratings by Pipe Size
Maximum recommended load by pipe size, per Empire Fig. 310 engineering data. Match to your pipe's nominal size and apply your project's factor of safety.
| Pipe Size | Max. Rec. Load (lb) |
| 1/2–3/4" | 400 |
| 1–3-1/2" | 600 |
| 4–5" | 1,000 |
| 6–8" | 1,250 |
Listings & Standards
- MSS SP-58 / SP-69 Type 10
- Felt-lined variant; UL & FM listings apply to the standard (unlined) galvanized hanger
Competitor Cross-Reference
| PVF Pro (Empire Fig. 310) | Anvil | Cooper B-Line |
| Adjustable Swivel Ring Hanger | 69 | B3170 |
Cross-reference is for identification only. Anvil® and Cooper B-Line® are trademarks of their respective owners, which are not affiliated with or endorsing Empire Industries or PVF Pro. Always confirm fit and load rating for your application.
Frequently Asked Questions
Why a felt-lined ring?
The felt cushions the pipe at the support point, helping dampen noise and isolate condensation — useful in occupied spaces and on cold-water lines.
What rod does it use?
This hanger is sized for 3/8" threaded rod.
Fewer reorders. Lower cost per job. Keeps your crew stocked.