Everkem All Grip 60 vs. Liquid Nails Heavy Duty
An honest, spec-by-spec comparison of two multi-purpose construction adhesives — so you can match the right one to the job and the budget.
Side-by-Side Comparison
| Specification | Everkem All Grip 60 | Liquid Nails® Heavy Duty (LN-903) |
|---|---|---|
| Adhesive type | Acrylic-based, multi-purpose | Latex / low-solvent, multi-purpose |
| Standard | Meets ASTM C557 | Exceeds ASTM C557 |
| Interior / exterior | Yes | Yes |
| Initial grab | High — quick-grab | Instant holding power |
| Working time | ~10 minutes | ~20 minutes |
| VOC | Low — 54.7 g/L | Low-VOC |
| LEED v4 low-emitting | Refer to product data | Yes, qualifies |
| Cleanup | Water (while wet) | Water (while wet) |
| Bonds | Wood, concrete, masonry, drywall, foam board & most building materials | Wood, concrete, masonry, drywall, foam, brick veneer (not plastics, vinyl, stone, or flooring) |
| Color | Tan | Tan |
| Sizes | 10.1 oz | 10 oz, 28 oz, qt, gal, pail |
| Price (10.1 oz) | $3.50 | Typically higher |
Where Each One Wins
Choose All Grip 60 when…
- Cost per tube matters — same ASTM C557 category, lower price
- You want a fast initial grab to reduce bracing and keep moving
- Low odor / low VOC for interior work is a priority
- You're already ordering firestop, foam, or PVF — one same-day shipment
Choose Liquid Nails Heavy Duty when…
- You want a longer working time to reposition pieces
- Your submittal specifically requires its LEED v4 documentation
- You need a larger size — quart, gallon, or pail
- The spec or GC names Liquid Nails by brand
What They Have in Common
Both are multi-purpose construction adhesives that meet ASTM C557, work indoors and out, and bond the porous structural materials you hit most on a jobsite — wood, concrete, masonry, drywall, foam board, and brick veneer. Both are low-VOC, both go down with a standard caulking gun, both are tan, and both clean up with water while still wet. For the everyday "glue this to that" structural bond, they're functionally interchangeable — the decision comes down to working time, size, price, and what the spec calls for.
Multi-purpose construction adhesives like these are built for porous structural materials. Neither is intended for non-porous or specialty substrates — plastics, vinyl, mirrors, ceramics, natural stone, or flooring — so use a product specifically rated for those. For best results, make sure both surfaces are clean, dry, structurally sound, and above 60°F.
Frequently Asked Questions
Is All Grip 60 a direct replacement for Liquid Nails Heavy Duty?
They're the same class of product — multi-purpose, low-VOC, ASTM C557 construction adhesives — so for most porous structural bonding they're interchangeable. If your submittal specifically requires Liquid Nails' LEED documentation or a size it offers that this doesn't, account for that.
What surfaces does it bond?
Wood, concrete, masonry, drywall, foam insulation board, brick veneer, and most common porous building materials. Not recommended for plastics, vinyl, mirrors, ceramics, natural stone, or flooring.
Why is it cheaper than Liquid Nails?
It's a pro-grade adhesive from a manufacturer without the consumer-brand premium. The performance standard it meets — ASTM C557 — is the same one Liquid Nails is measured against.
What's the working time?
About 10 minutes. Liquid Nails Heavy Duty runs closer to 20 minutes, so if you need more time to reposition large pieces, factor that in.
How do I clean it up?
Wet adhesive cleans up with water; cured adhesive must be removed mechanically.
Liquid Nails® is a registered trademark of PPG Industries. This comparison is provided for product identification and evaluation purposes only; PVF Pro and Everkem are not affiliated with, authorized by, or endorsed by PPG. Specifications and pricing are subject to change — always refer to the current manufacturer technical data sheet before specifying or installing.